Trends

Previous 30 items
1
...
3
4
5
6
7
8
9
...
20
Next 30 items

An Old Story Re-Edited? - Firefly-Inspired Surfaces Improve LED Efficiency

A new type of light-emitting diode lightbulb could one day light homes and reduce power bills, according to Penn State researchers who suggest that LEDs made with firefly-mimicking structures could improve efficiency. Read more »

Resources | LpR Article | Technologies | Thermal Management | Feb 01, 2019

Materials, Manufacturing and Technologies for Designing Passive Cooling Devices

Until recently, incandescent bulbs and fluorescent lights were the dominant light sources. Today it’s the energy efficient, durable and, in the meantime, cost effective, LED. But to achieve these attributes appropriate cooling is still necessary and due to progress over the last few years the need for active cooling solutions is limited to a few high power applications as long as the material and technology is carefully chosen. John Broadbent, Managing Director at Columbia-Staver Ltd., describes the different technologies and materials and gives practical advice on how to find the right solution for an application. Read more »

Qualified Bluetooth Mesh – Making Lighting Controls Future-Proof

LpR 69 Article, page 88: At Lightfair USA, Siegfried Luger met with Patrick Durand, Worldwide Technical Director at Future Lighting Solutions. One of Mr. Durand’s striking statements was: “Basically, what we need is to future-proof lighting control.” This was the first time that this important aspect was so clearly addressed by a representative of the industry. This led us to asking Mr. Durand to provide LED professional with a technical article to clarify the current situation, explain the technical background that led him to making that statement and to give an idea of which requirements a controls solution must fulfill to be truly future-proof. Read more »

The Possible Future of Lighting - Paint-On Semiconductors from Ornate Quantum Physics

LED lights and monitors, and quality solar panels were born of a revolution in semiconductors that efficiently convert energy to light or vice versa. Now, next-generation semiconducting materials are on the horizon, and in a new study, researchers have uncovered eccentric physics behind their potential to transform lighting technology and photovoltaics yet again. Read more »

Resources | Research | Environment | Street Lighting | Jan 22, 2019

Pollinators: Switch Street Lights off at Midnight to Help Moths and Nocturnal Wildlife

Conservation is often a conflict between the demands of development and a desire to do what is best for the environment. It’s rare that we get the chance to report a decision which was taken for the good of people that has also panned out well for nature’s ecosystems. However, that is just what our new research paper found. Read more »

Optical Designs to Improve LED Lighting Efficiency of Medical Endoscopes

Lighting efficiency for endoscopic instruments has been deemed very poor, at only about 20%. While laboratory tests demonstrate that fiber optics bending is not problematic, optical simulations clearly show that lighting efficiency is strongly limited by the Étendue. Because of strong geometrical constraints in the light coupling area of an endoscope system, only a radical new optical design can provide significant improvement. Alexander Gaertner and Paola Belloni from the Faculty of Mechanical and Medical Engineering and the Steinbeis Transferzentrum Lichttechnik und Beleuchtungsoptik at the University Furtwangen discuss these issues and propose possible approaches. Read more »

Resources | LpR Article | Research | Micro-Optics | Jan 15, 2019

Smart Design of Freeform Micro-Optical Elements for Thin Direct-Lit Luminaires

LpR 69 Article, page 64: Direct-lit LED luminaires consist of LED arrays. In order to achieve homogenous light distribution a diffuser sheet is placed at a certain height above the LED array. Usually the distance between the LEDs and the diffuser has to be greater than the distance between the LEDs on the array. To overcome this limitation, additional optical elements like freeform lenses are necessary. Christian Sommer, scientist at the Institute of Surface Technologies and Photonics of the Joanneum Research Forschungsges.m.b.H and his colleagues, Claude Leiner, Ladislav Kuna, Paul Hartmann and Franz P. Wenzl propose a smart design concept for an extremely flat, direct-lit lighting system, making use of mask-less laser direct write lithography. Read more »

Colloidal Quantum Dots Make LEDs Shine Bright in the Infrared

ICFO researchers report on the development of a colloidal quantum-dot light emitting diode with unprecedented quantum and power conversion efficiencies in the infrared range. The ideal optoelectronic semiconductor material should be a strong light emitter i.e. should emit light very efficiently upon optical excitation as well as be an efficient charge conductor to allow for electrical injection in devices. These two conditions when met can lead to highly efficient light emitting diodes as well as to solar cells with the possibility to approach the Shockley-Queisser limit. Until now the materials that have come close to meeting these conditions have been based on epitaxially-grown costly III-V semiconductors that cannot be monolithically integrated to CMOS electronics. Read more »

How to Use the Technologies for Adaptive Lighting

The technologies to provide adaptive lighting are already in the marketplace and are accepted by some jurisdictions. Nonetheless, we have an inadequate understanding of how best to use these technologies, meaning that installations might not serve users well, and in the worst case, might lead to harm. Lighting researchers can generate the knowledge needed to support the best application of adaptive lighting technologies. The International Commission on Illumination (CIE) understands the importance and urgency to deal with problems of adaptive, dynamic and intelligent lighting in all application fields. Hence, this topic is a highlight of CIE’s research strategy. Read more »

Researchers Push Perovskite LEDs' Efficiency To Rivaling Best OLEDs

Compared to OLEDs, which are widely used in high-end consumer electronics, the perovskite-based LEDs, developed by researchers at the University of Cambridge, can be made at much lower costs, and can be tuned to emit light across the visible and near-infrared spectra with high colour purity. Now, researchers have set a new efficiency record for LEDs based on perovskite semiconductors, rivalling that of the best Organic LEDs (OLEDs). Read more »

Researchers from the University of Surrey Find that Blue Light Can Reduce Blood Pressure

Exposure to blue light decreases blood pressure, reducing the risk of developing cardiovascular disease, a new study from the University of Surrey and Heinrich Heine University Duesseldorf in collaboration with Philips reports. Read more »

New Algorithm Can More Quickly Predict Phosphor Materials for LEDs

Jakoah Brgoch, assistant professor of chemistry at the University of Houston, and members of his lab published a paper on Oct. 22 in Nature Communications describing how machine learning speeds discovery of new materials. By scanning a huge number of compounds for their key attributes they were looking for a new light conversion material that could be used in white LEDs. Read more »

UV LED Technology for Emerging Applications in Agriculture

The Ultraviolet (UV) LED market has expanded five-fold in the past decade and is projected to grow to over $1 billion by 2025. A key trend expected to influence the market is the ability to expand into new applications, including agriculture. UV light, at proper frequency and dose, can increase the production of active substances in medicinal and traditional plants and it can also help maintain a healthy growing environment. But to fully take advantage of UV LEDs, some major re-design considerations are required. Terrance Berland, CEO of the Violet Defense Group, the parent company of Violet Gro, will explain which considerations these are; for instance, why it is crucial to incorporate the appropriate lens material. Read more »

Research Reports | Smart Lighting + IoT | Resources | LpR Article | Oct 19, 2018

Challenges of the Integration of Lighting Systems and Components in IoT

LpR 68 Article, page 50: Following the rapid penetration of LEDs, lighting is now becoming integrated into the Internet of Things. Over the past three years a consortium of leading European companies worked on the OpenAIS project, which was partly funded by the EU within the Horizon 2020 program, and now showing the results working at a full size demonstrator. In this follow up article to the introduction article of LpR 67, Ben Pronk, System Architect at Signify, and Stefan Verbrugh, Project Manager at Signify and Work Package leader in OpenAIS give deeper insight into the project. They explain the lighting specific challenges, describe the generic challenges for IP controlled lighting and present the approach to these challenges. They conclude by summarizing the findings from the pilot. Read more »

Laser Technology for Lighting Applications: A Review and Analysis of a Promising Technology

LpR 68 Article, page 44: LEDs are currently the dominating light source: efficient and cost effective. But LEDs also have some drawbacks. Another interesting technology developed slowly in the shadow of LEDs and has become an interesting solution for some specific applications: GaN based blue solid state laser devices. Although this technology offers some very interesting advantages, it also has challenges. Nicola Trivellin, Matteo Buffolo, Carlo De Santi, Gaudenzio Meneghesso, Enrico Zanoni and Matteo Meneghini from the University of Padova and its spin-off LightCube have been working toward the development of experimental systems and demonstrators and disclose their findings of the comparison between LED and LD systems. Read more »

A Study on Aerosol Jet Printing in LED Module Manufacturing

LpR 68 Article, page 38: LED module manufacturing technologies have certainly improved over the last few years but the requirements have also increased. More components are packed on today’s modules causing additional thermal stress, and, at the same time, the demand for lower cost challenges module manufacturers. So the (re-) search for new materials and new manufacturing processes and manufacturing technologies is still on. Paul Hartmann, Director of the Institute of Surface Technologies and Photonics at the Joanneum Research Forschungsgesellschaft m.b.H., and his team, Andreas Rudorfer, Martin Tscherner, Christian Palfinger, Frank Reil, Franz P. Wenzl with Ioannis E. Seferis, Eugeniusz Zych from the Faculty of Chemistry of the University of Wroclaw investigated the opportunities of aerosol jet printing and proved the applicability for alternative ways of phosphor deposition and integration and to replace wire bonding of dies. Read more »

Research Reports | Smart Lighting + IoT | Resources | LpR Article | Oct 12, 2018

Integrating Lighting in the Internet of Things

LpR 67 Article, page 80: Following the rapid penetration of LEDs, lighting now becomes integrated into the Internet of Things. Over the past three years a consortium of leading European companies worked on the OpenAIS project, partly funded by the EU within the Horizon 2020 program. Now showing the results, the consortium is working on a full size demonstrator. Ben Pronk, System Architect at Philips Lighting Research, and Frank van Tuijl, Project Manager at Philips Lighting show how OpenAIS creates an open ecosystem to enable a wider community to deliver the smartness of light and they explain how it is possible to adapt the system to cater to the diversity of people and demands. Read more »

Spanish Researchers Develop Sand that Produces White Sun-Like LEDs

The team led by the chemist-technologist Rubén Costa of IMDEA Materials (Madrid) and the chemists Jesús Berenguer of the University of La Rioja and Javier García of the University of Alicante has overcome one of the biggest obstacles in the progress towards new sources of healthier artificial lighting. Read more »

Dynamic In-Car Lighting Scenarios - Osram's Osire E4633i Prototype with Inova's Serial Control Driver

The more autonomous a car becomes, the more the way in which it is used will change. As developments continue toward autonomous driving, more and more attention is being focused on the passenger cell. Light will become an integral part of the passenger cell, taking on functional and design-specific tasks. Previously static light, which could only be switched on and off, has now been given a dynamic dimension with the prototype of the Osire E4633i – with countless design options for car manufacturer. Read more »

LED Lighting Requires New Approaches in Optics

LpR 67 Article, page 88: Even though LED technology has been established LEDs still need new approaches in electronics, thermal management or optics to make complete use of their advantages. Marek Škereň, Chief Technology Officer of IQ Structures, explains how new optical devices, with the trade name Nanoptiqs, based on principles of diffraction are applied to achieve improved performance of white light illumination systems. This unique solution is based on full control over the modulation of material and geometric properties of the optical elements at a nano-level. A combination of complex transmission diffractive elements, with specially designed systems of micro-reflectors (produced using an innovative mass-production technique) is also presented as a promising flexible building unit for the construction of new generation luminaires. Read more »

Automatic Panel Level Transient Thermal Tester

LpR 67 Article, page 44:The thermal resistance junction in case is an important parameter for the reliability of LEDs because degradation of the LED is temperature driven. Simulation and testing has advanced over the past few years but transient thermal analysis (TTA), which is required to understand the thermal transfer path, is especially work and time consuming - and not automated. Gordon Elger, Professor for Electronic Manufacturing Technologies, Technische Hochschule Ingolstadt, and his co-authors, Maximilian Schmidt, Alexander Hans, and Dominik Müller, present and discuss an automatic panel level TTA tester. They explain the challenges and the solution and demonstrate the applicability of using LED test board-panels. Read more »

Electron Beam Patterning for Full-Color HR OLED Displays

OLED microdisplays are increasingly establishing themselves in consumer-ready wearables and data glasses. In order to meet the requirements for higher efficiency, higher contrast, and higher resolutions in these applications, Fraunhofer FEP scientists have developed a new micropatterning approach for OLEDs on silicon substrates. This might eliminate the use of color filters and shadow masks in the future and allow full-color displays to be developed by means of a new process. An increase in efficiency and considerably broader color gamut have already been demonstrated in first experiments. Read more »

Liquid-Suspended White QD LEDs Achieve Luminous Efficacy Record

Quantum dot (QD) white LEDs that show a luminous efficacy of 105 lm/W have been developed. The QDs are liquid-based and, according to researchers, could help the LEDs achieve an efficacy double that of LEDs that incorporate quantum dots in solid films. With further development, researchers say the new LEDs could reach an efficacy over 200 lm/W. Read more »

Technologies | Research Reports | LEDs | Manufacturing | Jul 12, 2018

InteGreat Project Successfully Researched New Approaches to LED Production

In the InteGreat research project, Osram Opto Semiconductors coordinated a consortium comprising seven partners from science and industry. Between December 2014 and February 2018 the project partners investigated time-honored manufacturing approaches and know-how along the entire LED production process with the aim of identifying potential areas for optimization. The new insights allow for LED products to be given additional superior properties that would have been difficult or even impossible to achieve with the technologies previously used to produce LEDs. Read more »

Technologies | Research News | Thermal Management | Jul 09, 2018

Intended for High-Performance Computer Chips - Maybe Also Useful for LEDs

The inner workings of high-power electronic devices must remain cool to operate reliably. High internal temperatures can make programs run slower, freeze or shut down. Researchers at the University of Illinois at Urbana-Champaign and The University of Texas, Dallas have collaborated to optimize the crystal-growing process of boron arsenide – a material that has excellent thermal properties and can effectively dissipate the heat generated in electronic devices. Read more »

Lifetime- and Economic Efficiency Simulation of LED Luminaires in Dymola/Modelica

Article from LpR 66 | page 40: The lifetime of an LED system is usually specified by the LM-80 report using the TM-21 method. Unfortunately, this value is solely valid for one specific application. Sebastian Hämmerle and Thomas Schmitt from the University of Applied Sciences in Vorarlberg developed a new open-source Modelica library for dynamic simulation of LEDs: The DynaLed library. The aim of the work was to evaluate the lifetime and the corresponding economic efficiency of LEDs in dynamic operation by means of the LM-80 report and according to the TM-21 calculation method. Furthermore, it should be possible to use the library for component dimensioning, e.g. the heatsink. The primary task was to develop simulation models which can be parametrized with manufacturer information, e.g. the datasheet, but still provide sufficient accuracy. As an application example an LED louvre luminaire (Article Code: 29001077) from LEDON Lamp GmbH was simulated utilizing the developed library. At the end, results from the lifetime- and the economic efﬁciency simulation were discussed. Read more »

Full-Color InGaN/AlGaN Nanowire Light-Emitting Diodes for SSL and Displays

III-nitride based nanowire light-emitting diodes (LEDs) have received a staggering response as a future candidate for solid-state lighting and full-color displays due to their unique and exceptional features including drastically reduced polarization fields, dislocation densities as well as the associated quantum confined Stark effect (QCSE) on account of their effective strain relaxation. Moab Rajan Philip and his supervisor Dr. Hieu P Nguyen in the Nano-Optoelectronic Materials and Devices Laboratory at the New Jersey Institute of Technology (NJIT) present astonishing ideas to fabricate and control the color emission of III-nitride nanowire LEDs via molecular beam epitaxy (MBE) growth techniques. The advantage of such LEDs and their characteristics is also discussed. Read more »

KAIST Team Develops Flexible Blue Vertical Micro LEDs

In CES 2018, micro LED TV was spotlighted as a strong candidate for replacing the active-matrix organic light-emitting diode (AMOLED) display. Micro LED is a sub-100 um light source for red, green and blue light, which has advantages of outstanding optical output, ultra-low power consumption, fast response speed, and excellent flexibility. Professor Keon Jae Lee from the Department of Materials Science and Engineering and his team have developed a low cost production technology for thin-film blue flexible vertical micro LEDs (f-VLEDs). Read more »

EcoDesign Directive | Organization News | Business | May 31, 2018

Key Principles for the Ecodesign Framework to Continue to Deliver Substantial Energy Savings

The European Parliament adopted today an own-initiative report on the implementation of the Ecodesign Directive, while the European Commission is now more than halfway through the 2016-2019 Ecodesign Work Plan. Read more »

The Austrian Province of Burgenland Invests in Joanneum Research

At today’s press conference in Weiz, Austria, the provinces of Styria, Carinthia and Burgenland emphasised their prospective closer cooperation in the area of research. Burgenland holds an interest of five percent in Joanneum Research and will be active in the promising research area of “Smart Connected Lighting”. Thus, the research axis south of Carinthia through Styria into Burgenland is to be further reinforced, and international visibility of domestic research is to be increased. Read more »

Previous 30 items
1
...
3
4
5
6
7
8
9
...
20
Next 30 items