UV-C & IR
Toyoda Gosei | UV-C | UV
|
May 02, 2024
Toyoda Gosei Develops UV-C LED with World-Class Light Output
Toyoda Gosei Co., Ltd. has developed deep ultraviolet (UV-C) LEDs with light output that is among the highest in the world. UV-C is used in disinfection as it destroys viral and bacterial DNA structures and inhibits their replication. As an alternative light source for mercury lamps used for disinfection, improved performance of UV-C LEDs has been expected. Sample sales of Toyoda Gosei’s high performance LEDs started internationally in April 2024, to promote their wider use for disinfecting water, air and surface.
Read more »
DOWA | IR
|
Feb 21, 2024
DOWA Announced SWIR LEDs with the World's Highest Efficiency
DOWA ELECTRONICS MATERIALS CO., LTD., a subsidiary of DOWA HOLDINGS CO., LTD. has successfully developed and released a high-efficiency Short-Wavelength-Infrared (hereinafter SWIR) LED chip series which has the world’s highest efficiency in the peak wavelength range of 1,200 to 1,900 nm.
Read more »
UV LED | Nichia | UV
|
Dec 11, 2023
Nichia Will Launch UV-B (308nm) and UV-A (330nm) LEDs
Nichia, the world’s largest LED manufacturer and inventor of the high-brightness blue and white LED, is scheduled to launch two new UV LEDs in March 2024: UV-B LED with a peak wavelength of 308nm and UV-A LED with a peak wavelength of 330nm.
Read more »
DOE | UV | Regulation
|
Oct 02, 2023
Discrepancies in UV Product Claims: CALiPER Report Reveals Need for Industry Standards and Accountability in Germicidal UV Technologies
In a groundbreaking CALiPER report released this month, the radiometric performance of germicidal ultraviolet (GUV) products has come under intense scrutiny, revealing startling discrepancies between manufacturers' claims and actual product performance.
Read more »
IR | Bolb
|
Jul 04, 2023
Bolb’s 295nm UV-B LEDs Cross the 10% WPE Threshold to the Benefit of People, Animals, and Horticulture
UV-B light, specifically targeted to 295nm, plays an essential role in human, animal, and plant health. Now, thanks to advances from Bolb, UV-B LED wall plug efficiency has surpassed 10%. At this level of performance, UV-B application efficiency is far better than what can be achieved with mercury lamps. Bolb’s LEDs offer additional advantages such as purer spectrum, much longer lifetime in frequent use, simpler digital programming, and control, and they contain no toxic and environmentally harmful mercury.
Read more »
IR Sensor | Vishay | IR
|
Jul 03, 2023
IR Sensor Modules Provide Robust Operation in Direct Sunlight
Vishay Intertechnology, Inc. (NYSE: VSH) today introduced two new fixed-gain infrared (IR) sensor modules designed to lower costs and increase stability for outdoor sensor applications. Offering typical irradiance of 1.3 mW/m² in compact Minimold packages, the surface-mount TSSP93038DF1PZA and leaded TSSP93038SS1ZA provide robust operation in direct sunlight, while still providing enough sensitivity for light barrier applications.
Read more »
UV | Optics
|
Apr 28, 2023
New Highly Efficient UV Optics for the UV-C Range from Asahi Rubber
The Japanese optics manufacturer Asahi Rubber recently introduced new UV optics especially for the UV-C range (280 nm). The silicone lenses named AL-10M-DUV280 (for LEDs of a size of 3.5 x 3.5 mm) and AL-20M-DUV280 (for LEDs of a size of 6.8 x 6.8 mm) were measured with the UV-C LEDs of the type NCSU334B from Nichia and subjected to an endurance test of 15000 hours, whereby hardly any loss of brightness and no damage could be detected. This underlines the high quality of the optics, whose light transmission is 90%.
Read more »
IR | ams OSRAM
|
Apr 06, 2023
New Photodiode Improves Performance in Visible and IR Light Applications
Premstaetten, Austria and Munich Germany (April 6, 2023) -- ams OSRAM (SIX: AMS), a global leader in optical solutions, has launched the TOPLED® D5140, SFH 2202, a photodiode that offers improved performance compared to existing standard photodiodes, including higher sensitivity to visible light in the green part of the spectrum, and increased linearity.
Read more »
Silanna | Nano-Structures | UV
|
Sep 30, 2022
Silanna UV Makes Ultraviolet LED Manufacturing Breakthrough With Nanostructures
A major breakthrough in UV-C LED technology from Silanna UV offers huge advantages for applications as diverse as disinfection, water quality monitoring, gas sensing, liquid chromatography, and chemical and biological analysis. The new manufacturing approach promises to make deep ultraviolet and far ultraviolet LEDs easier to make, more efficient at shorter wavelengths, and more reliable. With the renewed focus on air, water and surface disinfection following the Covid-19 pandemic, these next-generation UV LEDs are already attracting interest.
Read more »
UV | DOE
|
Aug 13, 2022
DOE Reports Examine the State of Current Commercial UV LEDs
The COVID-19 pandemic has put a spotlight on germicidal ultraviolet (GUV) radiation for air and surface disinfection. This technology area represents a growing opportunity to improve indoor air quality while saving energy over high-ventilation approaches.
Read more »
Ferdinand Braun Institut | UV | Micro-LEDs | Trends
|
Jul 12, 2022
UV micro-LEDs for Sensing, Production and Communication
Researchers at the Ferdinand-Braun-Institut (FBH) in Berlin have successfully produced the first prototypes of micro-LEDs that emit in the ultraviolet spectral range (UVB). The micro-LEDs with 310 nanometers (nm) emission wavelength feature a small size of the emitting area with diameters down to 1.5 micrometers (µm). This is hundreds to thousands of times smaller than conventional UV LEDs. The micro-LEDs can be closely packed with pitches down to 2 µm to form a two-dimensional array on a chip, resulting in high-resolution UVB emitting areas.
Read more »
UV | GLA | UVGI
|
Jul 12, 2022
Global Lighting Association and International Ultraviolet Association to Co-operate on UV Disinfection Technology
The Global Lighting Association (GLA) and the International Ultraviolet Association (IUVA) have signed a memorandum of understanding to co-operate on ultraviolet disinfection technology – also known as ultraviolet germicidal irradiation, or UVGI.
Read more »
UV | Standardization | IES | IUVA
|
Apr 01, 2022
The Illuminating Engineering Society and the International Ultraviolet Association Release a New American National Standard for Measuring Ultraviolet LEDs
The Illuminating Engineering Society (IES, est. 1906), in partnership with the International Ultraviolet Association (IUVA, est. 1999), has published its first in a series of American National Standards for the measurement of ultraviolet product emissions. Since its discovery in 1877, germicidal ultraviolet disinfection has been deployed globally to reduce the rate of transmission of tuberculosis and other airborne pathogens in indoor spaces, including SARS-CoV-2, the virus that causes COVID-19.
Read more »
UV | Violeds | Omicron | Sterilization
|
Mar 01, 2022
Violeds Sterilizes Omicron Variant As Well
Seoul Viosys, a company specializing in optical semiconductors, announced an experimental result confirming that its Violeds technology sterilizes 99.99% Omicron Variant (SARS-CoV-2 Variant: B.1.1529) in one second, which has been spreading around the world.
Read more »
Edison Opto | UV | Featured
|
Nov 26, 2021
Edison Opto UVA + White & UVC Series Customize Design Solution
Edison Opto offers customized UVA + White and UVC solutions for continuous disinfection to reduce bacteria and airborne viruses. In the wake of the global outbreak of COVID-19, the people’s need for anti-epidemic, sterilization, and anti-virus products has escalated, ranging from portable sterilization equipment, home appliances sterilization, and public health sterilization.
Read more »
Trends | UV | Sensors | Wearables
|
Aug 13, 2021
NTU Singapore Scientists Create Ultra-high Performance Flexible UV Sensors for Use in Wearables
To enable the development of wearable devices that possess advanced ultraviolet (UV) detection functions, scientists from Nanyang Technological University, Singapore (NTU Singapore) have created a new type of light sensor that is both flexible and highly sensitive.
Read more »
UV | Ushio | Covid | Corona | Disinfection
|
Jul 29, 2021
Research Confirms Ushio’s Technology Is Effective Against a Variant of SARS-CoV-2
Hiroshima University and Ushio Inc. have been conducting a joint research project (Study on the disinfection (*1) and viral inactivation effects of 222 nm UV-C light using Care222). As part of this study, a group of researchers, including Professor Hiroki Ohge of the Department of Infectious Diseases at Hiroshima University Hospital, and Professor Takemasa Sakaguchi of the Virology Section of the Graduate School of Biomedical and Health Sciences at Hiroshima University, evaluated the effect of irradiating a SARS-CoV-2 variant (*2) with Ushio's Care222 filtered Far UV-C light disinfection technology. The research showed that Care222 technology is equally effective in inactivating a SARS-CoV-2 variant as in inactivating the original SARS-CoV-2 strain.
Read more »
Instrument Systems | IR | Fingerprint | Sensor
|
Jun 28, 2021
Enabling Optical Fingerprint Sensors with IR Wavelength at 1380 nm
Instrument Systems has developed a modular high-end IR test solution that meets the requirements of optical under-display fingerprint sensors with wavelengths above 1100 nm. As the IR radiation at 1380 nm is verified to avoid burn-in phenomena, the requested test equipment needs to be a high-end solution: high-resolution and calibrated for precise measurement of radiometric quantities, pulse measurement in the µs range and with temperature control.
Read more »
Instrument Systems | Infrared Sources | Measurement | Featured | IR
|
May 08, 2021
Precise Characterization of Infrared Sources
The demand for IR measurement solutions has increased significantly in the recent years. IR LEDs and IR lasers such as VCSELs have enabled many new applications in the field of “IR sensing”, using the NIR range (800-1000 nm) but also higher wavelengths as 1380 nm. Measurement tasks range from 3D sensing (facial recognition, LiDAR and automotive in-cabin driver monitoring) to optical fingerprint sensors and healthcare monitoring.
Read more »
IR | Luminus Devices
|
Apr 08, 2021
New IR LEDs Set New Output Benchmark
Luminus Devices has expanded its portfolio of ultra-high-power infrared (IR) LEDs with a new product line that addresses the rapid expansion of life sciences, medical, machine vision, and industrial applications.
Read more »
UV | Signify
|
Mar 08, 2021
Signify and Innovative Bioanalysis Validate Effectiveness of Signify’s UV-C Lighting on Disinfecting the Air
Signify, the world leader in lighting, together with Innovative Bioanalysis, a CAP, CLIA, AABB Certified Safety Reference Laboratory in Costa Mesa (California) have conducted research that validates the effectiveness of UV-C disinfection upper air luminaires on the inactivation of SARS-CoV-2, the virus that causes COVID-19.
Read more »
UV | Lumitronix
|
Feb 25, 2021
Lighting and Bacterial Disinfection in One – Lumitronix Presents LED Module With Dual Function
The Swabian LED technology company Lumitronix has developed a three-row LED module equipped with the NF2W585AR-P8 LED from world market leader Nichia, which was launched in January 2021.
Read more »
UV-C | Nichia | Components | Featured | UV
|
Jan 26, 2021
Nichia’s Latest UV-C LED Disinfection Efficacy Proven to Combat Viruses
NICHIA, a leading global LED manufacturer, further demonstrates its commitment to innovation and improvements to global well-being with the public launch of its newest deep UV LED, the NCSU334B. At a peak wavelength of 280 nm, NICHIA’s deep UV LED outperforms other commercially available UV-C LED’s, regardless of wavelength, in output, efficiency and lifetime. At the same time, new independent research confirms they are also best-in-class for disinfection performance against SARS-CoV-2 virus.
Read more »
SSL | Components | UV | UV LED | UV-C | Disinfection
|
Dec 14, 2020
Osram Enters UV-C LEDs Market Offering Their First Products
The longer the coronavirus pandemic lasts, the more important it is to stay safe and healthy in everyday life. Hygiene measures, such as wearing a facemask or socially distancing, help safeguard against the spread of germs. But light in the right wavelength also makes an enormous contribution to fighting viruses. UV-C light can eliminate 99.9 percent of viruses and bacteria on surfaces, in the air and in drinking water. As one of the world's leading manufacturers, Osram Opto Semiconductors now enables particularly small and robust disinfection applications with its LEDs, while also driving the industrialization of these special light sources forward. The Oslon UV 3636 marks the beginning of a comprehensive portfolio in the UV-C LED sector.
Read more »
Featured | Measurement | Test Equipment | UV | Calibration
|
Dec 09, 2020
New Calibration Standards in the UV A/B/C Range
UV radiation encompasses a very wide wavelength spectrum between 10 and 400 nm and is subdivided in ISO Standard 21348 into three ranges. The UVC range between 100 and 280 nm is currently extremely relevant for air and water disinfection for combating COVID-19. Since the outbreak of the pandemic this has been manifested, among other things, in a sharp increase in the demand for UVC light sources.
Read more »
SSL | Components | UV | UV-Modules | Disinfection
|
Dec 01, 2020
LightLab Sweden's New UV Light Disinfection Technology Outperforms Conventional UV-Technology
Swedish cleantech company LightLab Sweden is introducing a new UVC disinfection technology called PureFize®, proven to inactivate bacteria and viruses, among them SARS-CoV-2. To test its effectiveness, LightLab Sweden partnered with SAES Group and the University of Siena, Italy. To proof the effectiveness, a prototype of a consumer product has been designed. It shows that PureFize can be used to inactivate any SARS-CoV-2 presence (>99.9999%) on items that consumers use every day. The results will be submitted for publication in the International Journal of Public Health.
Read more »
SSL | UV | UV-C | UV-Modules | Disinfection
|
Oct 23, 2020
Higher-Performance UV-C Solutions from Lumitronix Feature Nichia's New NCSU334B UVC LED
Following the successful introduction of the first UVC LED modules in August 2020, LED expert Lumitronix from Hechingen is expanding the existing concept of linear module solutions with three new, more powerful versions. These are as well mainly addressed to professional customers who are trained in handling UV-C radiation and can ensure a risk-free application.
Read more »
SSL | Components | UV | UV-Modules | Curing
|
Oct 21, 2020
New DELOLUX 504 UV LED Lamp Speeds up Adhesive Curing
DELO has introduced a new LED lamp for curing UV adhesives. The spot light source DELOLUX 504 features the latest generation of UV LEDs, achieving three times the intensity of the previous model. It was developed for high-speed production in the electronics and automotive industries that require small areas to be irradiated and equipment to be easily integrated into existing systems.
Read more »
SSL | Systems + Applications | UV | UV-C | Disinfection
|
Oct 16, 2020
Energy Focus Launches Advanced UV-C Disinfection Product Portfolio Offering Airborne and Surface Disinfection Solutions
Energy Focus, a leader in sustainable LED lighting and human-centric lighting ("HCL") technologies, today launches a portfolio of germicidal UV-C Disinfection ("UVCD") products, with advanced, patent-pending technologies designed to destroy 99.9+ percent* of various pathogens, including influenza and coronaviruses such as SARS and SARS-CoV-2, in the air or on surfaces to improve indoor hygiene and sanitation. Three initial products – nUVo™, abUV™, and mUVe™ -- complement each other to meet the needs of air and surface disinfection for commercial, industrial and residential indoor environments. The products are available for pre-order on the Company's e-commerce website, through its internal salesforce and distribution channel partners, and deliveries are expected to start during the first quarter of 2021.
Read more »
Automotive | IR | Components | Gesture-Control
|
Sep 28, 2020
Maxim Dynamic Gesture Sensing for Automotive Applications at Industry's Lowest Cost and Smallest Size
Designers of automotive systems can now add dynamic hand-gesture controls with greater ease at the industry's lowest cost and smallest size with the MAX25205 data acquisition system from Maxim Integrated Products, Inc. Featuring integrated optics and a 6x10 infrared (IR) sensor array, the MAX25205 detects swipe and hand-rotation gestures without the complexity of time-of-flight (ToF) cameras at 10x lower cost and up to 75 percent smaller size.
Read more »