UV-C & IR

SSL | UV | UV-C | Systems + Applications | Water-Purification | Sep 28, 2020

PearlAqua Deca™, World's First UV-C LED Point-of-Entry System Hits the Water Treatment Market

AquiSense Technologies, the world leader in ultraviolet (UV) LED water disinfection systems, is happy to announce it has launched the PearlAqua Deca™, the first UV LED disinfection system designed for the point-of-entry residential, commercial and light industrial markets. The PearlAqua Deca offers operational benefits specific to LEDs, including intermittent flow management, mercury free, and low cost of ownership. Read more »

SSL | UV | UV Measurement | UV-C | Sep 11, 2020

Gigahertz-Optik UVC Radiometer for Germicidal UV Sources Including 222 nm Excimer Lamps

The new X1-1-UV-3727 radiometer is designed to accurately measure the far-UVC irradiance or dose produced by 222 nm excimer lamps. This is in addition to the measurement of other germicidal UV source types including low pressure Hg lamps and UV LEDs. Each meter has a wide dynamic range and is supplied with a traceable calibration certificate from the ISO-17025 accredited Gigahertz-Optik laboratory. Read more »

SSL | Components | UV | UV-C | UV-Modules | Disinfection | Aug 05, 2020

Lumitronix Adds New UV-C LED Modules for Sterilization and Decontamination to Its UV Portfolio

The Swabian LED company Lumitronix has used the current situation to expand its range of products in the UV-C sector. Within a short period of time, three linear module solutions have been developed, which are primarily aimed at professional customers who are trained in the use of UV-C radiation and can ensure hazard-free operation. Read more »

SSL | Components | UV | UV LED | Special Applications | Jul 24, 2020

OMC Announces New Ultra-High-Efficiency IR SMA Fibre-Optic Transmitter LED - FDE870HE

OMC, the pioneer in optoelectronics design & manufacture, announces its new FDE870HE industrial fibre optic transmitter LED that can deliver up to four times more launch power into multimode fibre for the same current versus existing transmitter devices. This ultra-efficient transmitter contains a high-performance 870 nm chip and features an array of micro-optic elements that gather and focus the emitted photons, coupling considerably more light into multimode optical fibres and enabling data to be transmitted reliably over greater distances, or for the system to use less power to achieve the same result. Greater long-term reliability of the system is a further benefit due to the vastly enhanced day-1 launch power and much lower drive current requirements. Read more »

SSL | UV | Special Applications | UV curing | Jul 24, 2020

FireJet™ ONE - The ONE Solution for All Your UV Curing Needs

Phoseon Technology introduces the industry's smallest, highest-powered member of their air-cooled product line, the FireJet™ ONE. These premium 20 W/cm² UV LED curing lamps are designed primarily for the inkjet, flexographic and screen printing markets where high power in a compact form factor, is a key requirement. Read more »

SSL | IR | IR-LEDs | Special Applications | Jul 22, 2020

Ushio's Epitex D-Series SWIR LEDs Now Up to Four Times More Powerful

Ushio has commenced production of its latest high-powered short-wavelength infrared (SWIR) LEDs, the Epitex D-Series. Following the prior success of the S-Series, the Epitex D-Series achieves the world's highest output power and efficiency: The high-power versions have ramped up their forward current to 1 A and gain a boost of up to four times the original radiated power output. Read more »

Luminaires | UV | Disinfection | Jul 14, 2020

LumenFocus Launches UVFocus Line of Germicidal Luminaires

Ultraviolet technology has been used for disinfection for many years now, but COVID-19 is shining a new light on its potential for disinfection applications. It is because of this unfortunate situation that we are looking at different ways that lighting technology can be used to help beyond just illuminating a space. Read more »

Tools | Database | UV | UV LED | Jul 03, 2020

Kopp Glass Eases UV-LED Product Selection with Its Revised UV-LED Product Database

Kopp Glass, Inc. announces a new release of its UV LED Product Database. With hundreds of new UV LED's available each year, researching and comparing the various options for a project can be tedious and time-consuming. To streamline the selection process, Kopp Glass updated its UV LED Product Database. Read more »

Research News | IR | Health + Wellbeing | Jun 29, 2020

Australian Associated Press Recently Wrote: Red Light Could Improve Over-40s' Eyesight

A small LED torch that emits deep red light could help improve declining eyesight, scientists have said: A study by University College London, involving a small sample size of 24 people, has shown that staring at long wavelength light for three minutes every day can "significantly improve vision" in those aged 40 and above. Read more »

SSL | Components | UV | UV-C | Disinfection | Jun 29, 2020

GKT's New UV-C Board Combines LEDIL's "VIOLET" and NICHIA's "NCSU334A"

In these turbulent times, we need reliable disinfection. Large amounts of water or large areas must be disinfected quickly within a few seconds. We offer a new design for this. Based on the new LEDIL "VIOLET" UV-C 12x multibeam lens, we have combined with the also new UV-C LED "NCSU334A" from NICHIA. Read more »

SSL | Systems + Applications | Products, Materials + Tools | Components | Luminaires | UV | UV-C | Jun 26, 2020

Signify Invests to Broaden Its UV-C Lighting Portfolio for Professional Disinfection

Signify, the world leader in lighting, is increasing its UV-C lighting production capacity and expanding its UV-C product portfolio. The company is leveraging more than 35 years of expertise in UV-C lighting to address the growing global need for the disinfection of air, surfaces and objects. Read more »

UV | Measurement | Featured | May 25, 2020

Precise Measurement of UV Light Sources for Disinfection

UV radiation encompasses a very wide wavelength spectrum between 10 and 400 nm and is subdivided in ISO Standard 21348 into three ranges. The UVC range between 100 and 280nm is currently extremely relevant for air and water disinfection for combating COVID-19. Since the outbreak of the pandemic this has been manifested, among other things, in a sharp increase in the demand for UVC light sources. Read more »

Components | UV | UV-LEDs | UV-C | Disinfection | May 04, 2020

Effective UV-C LED Solutions for Pathogen Containment, Medical and Biotechnical Applications at euroLighting

Short UV-C light has been proven to kill 99.9 percent of bacteria, viruses and other pathogens. euroLighting offers new product solutions in the form of UV-C LEDs, the effect of which can be used specifically to effectively sterilise air, water and surfaces and greatly reduce the risk of infection. Based on the current virus pandemic and in view of statements by experts that such situations could occur more frequently in the future, solutions are urgently sought to contain the spread of pathogens as quickly and effectively as possible. Read more »

Components | UV | UV-LEDs | UV-Modules | UV-C | Disinfection | May 04, 2020

Lumitronix Provides Solutions for Use of UV-C LED Under Real Conditions

As an official distributor of Nichia in Europe, the Hechingen-based LED company Lumitronix offers access to the most powerful UVC LED currently on the market. The NCSU334A emits a wavelength of 280 nm in the ultraviolet range and especially in the UV-C band and enables immediate sterilization and cleaning of air, liquids and surfaces. Bacteria, germs and viruses can be reliably killed in this way. This means that the UV LED from the world's largest LED manufacturer can also act as a possible weapon against the novel corona virus. Read more »

Components | UV | UV-LEDs | UV-C | Disinfection | Apr 23, 2020

Luminus Breaks the $0.10 per mW Barrier for UV-C LEDs

Luminus Devices announces the immediate availability of its newest UV-C LED, the XBT-3535, with performance ranging from 50 mW to 80 mW in the 275-285 nm range. With the global need for disinfection and sterilization devices increasing, the price-performance combination of the XBT-3535 will allow companies to quickly bring novel and affordable solutions to market. Read more »

UV-C Radiometer for Disinfection Effectiveness and Safety of UV-C LEDs and Germicidal Lamps

The X1-1-UV-3726 radiometer enables the effectiveness of UV germicidal irradiation (UVGI) to be accurately determined for both low pressure mercury (254nm) germicidal lamps and UV-C LEDs. Additionally, the device has sufficient sensitivity to detect if undesired exposure poses a photobiological safety risk to users. Read more »

SSL | Technologies | Research News | UV | Disinfection | Apr 02, 2020

Seoul Viosys and SETi's Violeds Technology Proves 99.9% Sterilization of Coronavirus (COVID-19) in 30 Seconds

Seoul Viosys and Sensor Electronic Technology, Inc. ("SETi"), leading global innovators of UV LED products and technology, announced that it has been successful in achieving 99.9% sterilization of coronavirus (COVID-19) in 30 seconds. Tests were conducted with the research group of Korea University, Korea's top rank university, by using a compound semiconductor Violeds technology that is being mass-produced. Read more »

Featured | UV | UV-LEDs | UV-C | Disinfection | Curing | Apr 01, 2020

Nichia UV LED Technology Supports Evolving Markets

Nichia, a leading global specialist in LED technology, is now aiming to extend its dominance to the UV market following its impressive showcase at the recent RadTech 2020 conference and exhibition in Orlando, Florida, USA. The company's latest solutions remain ideal for curing applications, but an extended portfolio is of particular benefit, as UV is known to be incredibly effective in killing viruses, bacteria, fungi and protozoa. Read more »

UV | Components | UV LED | UV-LEDs | UV-C | Disinfection | Mar 31, 2020

Specification and Applications for ProLight Opto's Recently Released UV-C LEDs

Escalation of the Coronavirus outbreak have led to higher demand for Ultra-Violet C (UV-C) LED around the world. UV-C as a germicidal light source can inactivates microorganisms by destroying nucleic acids and disrupting their DNA with its short wavelength. The effective germicidal wavelength is between 200-290 nm; shorter wavelength is more efficient but is also more damaging to the human body. The major chip manufacturers make 265-285 nm as mainstream wavelength, because it can improve single chip's radiometric power and increase in sterilization efficiency. Read more »

UV | Tools | UV Measurement | Test Equipment | Mar 19, 2020

GL Optic's GL SPECTIS 4.0 UV - Accurate Characterization of UV-A, B and C Radiation Sources

GL Optic's new model of an affordable GL SPECTIS 4.0 UV is designed for fast verification of UV radiation in the production environment as well as in laboratories. GL Optic introduces a range of solutions optimized for UV LEDs measurement in a variety of applications. Read more »

UV | UV-LEDs | Disinfection | Components | Mar 05, 2020

Everlight Releases UVC3535NUB Series for Medical Treatment, Water and Air Purification & Sterilization

Everlight Electronics, a leading player in the global LED and optoelectronics industry, releases its new ELUC3535NUB series of UVC products for the maintenance of life quality and health, using the epitaxial and flip chips on the sapphire substrate to guarantee quality and sterilization. Read more »

SSL | Test Equipment | Safety | UV Measurement | UV | Tools | Mar 03, 2020

Instrument Systems: New Products for the Postponed L+B

Instruments Systems has been prepared to feature two new respectively optimized solutions for two different tasks at Light + Building which is postponed to September 27th - October 2nd. Instrument Systems has modified its proven TOP 200 telescopic optical probe to satisfy the requirements of the new IEC TR 62778 technical report. Furthermore, Instrument Systems launches traceable calibration UV-LEDs with extremely low measurement uncertainty. Read more »

Resources | Commentary | UV | Disinfection | Feb 05, 2020

Selecting the UV LED Wavelength for Purification Applications

Patrick Durand is the Worldwide Technical Director at Future Lighting Solutions (FLS) with over 15 years of experience in the solid state lighting industry. Patrick leads the FLS Technical Marketing teams and FLS laboratory teams located in multiple regions around the world with the objective of providing world-class support to lighting OEMs in developing luminaires with the latest SSL technology from the light source to the complete system incorporating the LED driver, optic, thermal management and intelligent control solutions. Read more »

Transparent Material Considerations for UV Optics in Horticultural Lighting Applications

Advancements in UV LED technology have begun changing the horticultural lighting landscape. Research is still ongoing to discover the extent of benefits and best practices of using UV light in horticulture. Using optics in tandem with UV LED light systems can help reach performance goals and optimize growing. Although there are several UV- transmitting materials available, not all are equivalent or able to meet the requirements for UV applications. Justine Galbraith, glass engineer, and Sharayah Follett, market development manager at Kopp Glass, Inc. discuss the performance considerations of various UV-transmitting materials and how application challenges are addressed by integrating optical elements. Read more »

Lextar Launches New UV LED Series for Sterilization and Curing

UV LED technology is regarded as a more efficient method of treating microorganisms in drinking water. This technology has been valued and included into drinking water treatment standard by NSF International last November for microbial reduction and provides a new test method to certify manufacturer claims. Read more »

Fast Production Test of UV-LEDs

Numerous applications, for example in the medical area or in material testing, are based on precisely specified UV radiation. For UV-B and UV-C emitters, the measurement of their spectrum between 325 nm down to 200 nm is generally only possible with extended measurement times due to their low radiant flux. As such, a condition for fast testing within production is high reliability in conjunction with high optical throughput of all participating system components. Within its well-established CAS-series of premium spectroradiometers over many years, Instrument Systems has developed a novel series-type CAS 140D-157. This new system measures precisely and reliably not only within the visible spectrum, but also in the UV. Coupled with a PTFE-coated integrating sphere, the system permits for fast 24/7 production tests of UV emitters to be run. Read more »

UV LED Technology for Emerging Applications in Agriculture

The Ultraviolet (UV) LED market has expanded five-fold in the past decade and is projected to grow to over $1 billion by 2025. A key trend expected to influence the market is the ability to expand into new applications, including agriculture. UV light, at proper frequency and dose, can increase the production of active substances in medicinal and traditional plants and it can also help maintain a healthy growing environment. But to fully take advantage of UV LEDs, some major re-design considerations are required. Terrance Berland, CEO of the Violet Defense Group, the parent company of Violet Gro, will explain which considerations these are; for instance, why it is crucial to incorporate the appropriate lens material. Read more »

Issue 63 | Challenges in UV Measurement

Over the past decade UV LEDs have emerged as a highly attractive alternative to conventional UV emission sources. They are cost effective and energy efficient devices in a small housing. These advantages allow new fields of applications and access to a larger group of users - even in the consumer market, e.g. water purification. Dr. Tobias Roesener, Product Manager at Instrument Systems, explains what makes accurate measurement of UV LEDs so complicated and what the crucial requirements on the measurement equipment are. In addition, he discusses calibration and stray light issues. Read more »

Tools | Test Equipment | UV | Jun 22, 2017

Instrument Systems Presents New Product Portfolio for UV Measurement

Instrument Systems’ new UV measurement solution consists of a spectroradiometer from the proven CAS series as well as a series of integrating spheres specifically designed for UV sources. It measures samples with various radiation spectra in the UV-A, UV-B and UV-C range starting at 200 nm. Read more »